You have no items in your shopping cart.
If you’re looking for a performance engine that'll last, look no further than our NEW Beasty 66cc/80cc Premium Kit! It’s perfect for those more comfortable with faster engines and have the desire to soar down the street. The Beasty Train Electric Start Bike Engine Kit will turn your ordinary beach cruiser into a speed machine. No rope pulling required and you can start or stop the engine in the middle of your ride. All of the Beasty bike engines feature the latest upgraded parts, including Japanese crank bearings and clutch components. Our manufactures abide by a strict quality control measures. They use the highest quality material available so that we can insure all our customers get only the best quality. Made with experienced riders and builders in mind, our Beasty 66cc engine kit is ready to ride- are you?
** Please note: Sprocket Clamp Assemblies included with Beasty 66/80cc kit comes with only 1x set of metal plates. In older production models these assemblies included 2x sets, but after testing and redesigning, our engine kits will only require 1x set. The redesign helps secure the assembly to your rear wheel sprocket better than on previous models.
** The parts included with the package are recommended primarily for bicycles with a single piece pedal crank system. If your preferred bicycle of installation uses a 3 pieces crank system, additional parts may be required for installation and these parts are commonly found at your local bicycle store.
On top of our quality assurance, we also offer our engines with an 1 month parts warranty.
The engine chain is mounted on the opposite side of the bikes sprocket, and will not interfere with your current drive chain and peddling.
Simple installation! Only basic hardware skill and tools required, around 2-3 hours for installation and adjustments. (Note: The seller is not responsible for any misuse of the engine kit or any warranty for installation).
Fits on Most 26" Wheeled Bikes (Cruiser, Chopper, Mountain, Road) with a standard V-frame. The frame should have at least 9-11” of clearance between the bottom bracket and top bar. *Note* CNS Carburetor upgrades might require extra materials to fit flush around the manifold. This can be resolved by wrapping electric tape around the manifold or by using PVC to fill in any gap between the carburetor port and the manifold.
Package includes *(Products in picture may come in different colors but this does not hinder performance.)
- Beasty 66/80cc 2-Stroke Engine
- Drive Chain Idler Pulley
- Low Profile Carburetor
- Upgraded Chrome Muffler
- Top Quality Japanese 202 Main Bearings
- 415 Heavy Duty Bike Engine Drive Chain
- Drive Chain Guard
- Built in Pull Start
- 2-Stroke Spark Plug
- Electron Ignition Coil (CDI)
- 12V Alternator
- Battery with Case
- Sprocket Clamp Assembly
- Upgraded Twist Throttle and Cable With Grip
- Updated 1.5L Black Teardrop Gas Tank (approx. ⅖ of a gallon)
- Fuel Line
- Throttle Cable
- Gasoline Tank Switch
- Internal Magneto
- 44 Tooth Chrome Drive Sprocket with 9 Holes
- Wide Pedal Crank Assembly
- High Quality Japanese Bearings on Both Ends of Crank
- Required Hardware and Gaskets
- Advanced Kill Switch
- Spark Plug Removal Tool